A lot of Toyota owners ask if Chevy Wheels will fit on their Tacoma or Tundra because they are 6 lug.
Modern Chevy Silverado’s have the same bot pattern 6 X 139.7 as the Toyota Tacoma. They do not however, have the same bolt pattern as the Toyota Tundra, that uses 5 lug’s. The Tacoma and Most Chevy’s do share the same bolt pattern but cannot easily interchange wheels due to the Chevrolet’s bore size being different.
Wheel Compatibility

Wheel compatibility is an important factor to consider when selecting the right set of wheels for your vehicle. It is important to make sure that the wheels you choose are compatible with your car, as this will ensure safe and secure fitment. Wheel compatibility involves several factors, such as bolt pattern, center bore, offset, and diameter.
Bolt Pattern

The bolt pattern is the number of lug nuts on the wheel and how they are spaced out around the wheel. This must match up with the lug nuts on your vehicle in order for the wheel to fit properly.
Center Bore

The center bore is the hole in the middle of the wheel that fits over the hub of your car. This needs to be exactly matched in order for proper fitment. The offset measures how far from the center line of a wheel sits from its hub mounting surface.
2014-2018 Tundra center bore 110.1 mm
2019-2021 Tundra center bore 110.1 mm
2022 Tundra center bore 95 mm
Offset

A positive offset means that the hub mounting surface is toward the front or brake side of a wheel, while a negative offset means it’s toward the back or brake side.
Diameter
Finally, diameter refers to how large or small your wheels are compared to standard sizes for your make and model of car.
When it comes to checking whether a particular set of wheels will fit your vehicle, there are several online resources available that can help you determine if they are compatible or not.
Overall, understanding wheel compatibility is essential when selecting new wheels for your vehicle since it ensures that they will be able to fit properly and securely onto your car without any issues, such as rubbing against other parts or components due to incorrect measurements or sizing differences between brands and models.
By using online resources and forum software, you can easily check whether a particular set of wheels will be compatible with your vehicle before making any purchases so that you know exactly what size tires fit best for each make and model of car before taking them home with you! This can be a discussion starter with a good forums top contributors.
Toyota Tundra Wheels and Chevy Compatibility

Toyota Tundra wheels have a different bolt pattern, center bore, offset, and diameter from Chevy wheels. This means that the bolts on the Toyota Tundra wheels are positioned further out from the hub than those on the Chevy wheels.
The center bore on Toyota Tundra wheels is also larger than that on Chevy wheels, meaning that the bearings are located further down in the wheel.
Finally, the offset on Toyota Tundra wheels is greater than that on Chevy wheels. This means that the wheel will be mounted further away from the hub than on a Chevy wheel.
Tacoma and Chevy Bolt Pattern

The Tacoma and most Chevys do share the same bolt pattern but cannot easily interchange wheels due to Chevrolet’s bore size being different. Additionally, Toyota’s need a larger center bore; many Chevy rims won’t fit a Toyota for this simple reason.
When looking at specs of both types of vehicles’ wheels, it’s easy to see why they may not be compatible with one another. For example, Toyota Tundra’s bolt pattern is 5×120 while Chevy Wheels are 4×100; this difference in bolt patterns means that they will not fit together properly even if other specs match up correctly.
When considering whether or not Toyota Tundra Wheels will fit onto a Chevy vehicle, it is important to look at all of these factors together rather than just one or two of them.
For instance, even if two cars have similar offsets and diameters but different bolt patterns or center bores, then their respective wheels will still not be compatible with each other. Additionally, some aftermarket companies make universal adapters which can allow for compatibility between certain types of vehicles despite differences in specifications.
However, these adapters should only be used as a last resort since they can potentially cause damage to both vehicles and their respective parts if used incorrectly or without proper care and maintenance.
In conclusion, it is important to consider all aspects when determining whether or not Toyota Tundra Wheels are compatible with Chevys before attempting any type of installation or modification process.
While some aftermarket companies offer universal adapters which may allow for compatibility between certain types of vehicles despite differences in specifications. These should only be used as a last resort since they can potentially cause damage to both vehicles and their respective parts if used incorrectly or without proper care and maintenance.
Changes To Be Made
Some People will bore out the Toyota Wheel’s to fit them on a Chevy, this is somewhat difficult and can minorly affect the wheels integrity, but it really depends on the wheel and can be done.
The wheel studs will also need to be changed on either the Chevy or the Toyota. The Silverado uses the 14 x 1.5 lug nuts and the Toyota Tacoma uses a 12 x 1.5 lug nut. Remounted new lug studs is sometimes a pain to break off the old ones, but putting in new ones is usually not a problem if you can find them.
Most Chevy hubs bore’s will measure in at about 78 mm vs the Toyota 106 mm. You could call around to a local machine shop in your area and see what they would charge to bore out the wheels for you to a specific size. I did around Nashvile, TN and most said they could do it for around 20$ to 30$ a wheel, which really isn’t that bad considering the wheels could look a lot better.
Most wheel spacers will not work and will not let the tires clear. The lug’s are readily available online and at most local auto parts stores.
From 2001 – 2020 the Toyota Tacoma stock wheels have the same bot pattern of 6×139.7.
2001-2004 have a aftermarket rim size of 15×6 – 16×7.
2005-2014 have a rim size of 16×7 -18×8
2015-2020 have a rim size of 16×7 – 18×7
It not have enough clearance if you are going for a bigger wheel, even if the tire is about the same size. You may need to lift the truck a bit just to have enough space for the wheels and tires. They may also protrude from the truck a bit, and some states require that they be covered by the fender.
More Toyota rims will fit on a Chevy than a Chevy will fit on Toyota. One major concern is the brake calipers being too big, and in that case, you would simply need a larger wheel no matter the case. The mating surface of the dish 3/4″ which will leave enough room to clear the calipers.
Most of the stamped steel rims will not have a big enough dish to allow the calipers to have enough room. Many Aluminum wheels do have enough of a dish to clear the caliper. If you were to find some Chevy wheels that are lug centric, rather than hub centric then you don’t have to deal with the center cone.
Lug Centric

Lug-Centric Wheels are centered by the lug nuts themselves, and they are very difficult to put on if you have never done it by yourself. They can easily be misaligned and you can mess up your truck by not having them mounted correctly.
It is the clamping force of the lug wheels to the hub that holds the wheel on with strength. If there is a lug that is not completely centered there will always be a gap and you may not be able to see it with your eyes.
They make hub centric rings to help you with centering the wheel. They come in plastic and metal. The plastic is typically for lighter vehicles and the metal ones would be used more on trucks and off-roading vehicles.
The rings do not hold any weight of the wheel or strengthen the seal in any way. They only act as a guide to mount them properly and are not always used. Usually, they are not used by professionals, but rather someone trying to do this themselves.
The gap’s around the lugs must all be equal to ensure that there is a good equal seal around the wheels and that there is no movement at all if you try to wiggle the wheel while you have it up on jack stands.
Hub-Centric wheels are centered by the hub, but ultimately centered by the lug nuts themselves. The Hub just helps you to gain a perfect seal and it just makes it easy for anyone to mount a wheel by themselves.
Putting on a lug-centric wheel takes more time and must be done very slowly to gain the perfect seal. There are a lot of different aftermarket wheels than can be put on a Toyota or Chevy that maintain that 6 X 139.7 lug pattern that are lug-centric.
Wheel Spacers

Some people think they can get around the caliper or hub issues by using wheel spacers. Doing so may require that you get longer studs, but not in every case. I could a few problems such as tire wear.
The wheel bearings are also at risk of wearing out faster, it changes the entire geometry of the suspension system. Steering could become harder, especially when breaking on a turn, so it would not be recommended in order to fit a desired tire between trucks.
Some well made wheel spacers will contain their own studs that are hub centric and can be mounted on well. These are usually used specifically for off-roading vehicles. Not typically for daily drivers.
A 1″-1.5″ spacer could be used and could cause minimal wear if it were used to fit a different wheel than the stock wheel, however you should make sure it at least has it’s own studs and is mounted properly.
Cheap wheel spacers, that you can usually find at a local auto parts store leave very little stud thread and can fail even if they are mounted properly. Just use common sense if you are going to run them. Many people have run them for years on their trucks with no problems.
Take Away
After reviewing the specifications of both Toyota wheels and Chevy wheels, it can be concluded that Toyota Tundra Wheels are not compatible with Chevy vehicles. This is due to differences in bolt pattern, center bore, offset, and diameter between the two types of wheels.
Even though the bolt patterns for some Toyota and Chevy wheels may be similar, the center bore sizes are visibly different, which could create a bolt hole misalignment resulting in uneven wear, increased stress on bearings, and a likelihood of potentially breaking in the long run.
Therefore, it is not recommended to attempt to install Toyota Tundra Wheels on a Chevy vehicle without significant modifications, which can weaken the integrity of both the wheels and the Chevy vehicle. It is essential to ensure that any upgrades made to your Chevy vehicle are designed to fit perfectly and match the same specifications to prevent damage to the car or other parts.